Phnom Penh, serving Cambodia and the region

Glossary

Condensate

The liquid water, usually mixed with oil and dirt, that drops out of compressed air as it is cooled after compression.

Compressing air concentrates the water vapour it contains. When the air cools in the aftercooler, receiver, dryer and pipework, that vapour condenses into liquid condensate, carrying oil from oil-injected machines and particles from the intake.

In humid climates the volumes are large. As a worked physics example: a compressor delivering 10 m³/min of free air drawn in at 30 °C and 80% RH, compressed to about 7 bar(g) and dried to a +3 °C pressure dew point, releases roughly 14 litres of water an hour, about 340 litres a day.

Practical note: every point where condensate collects needs a reliable drain, ideally a zero-loss drain. Condensate from oil-injected compressors must pass through an oil-water separator before discharge, in line with local environmental requirements.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search