An aftercooler is the first stage of compressed air treatment. Air leaves the compression element hot and saturated; cooling it with ambient air or water condenses a large share of the moisture, which a separator then removes as condensate. Most packaged screw compressors include one.
It matters because everything downstream is sized on its outlet temperature. Air that leaves the aftercooler warm carries more water vapour into the refrigerated dryer, raising its load and the risk of moisture carryover.
In hot, humid climates the approach temperature is the key figure: an air-cooled aftercooler can only cool to some margin above the air around it. Keep cooling air clean and unrestricted, duct hot air out of the compressor room, and pair the separator with a reliable zero-loss drain.