Phnom Penh, serving Cambodia and the region

Industry

Clean air for sorters, steady blowers and dust that stays in the collector

Air systems for rice and feed mills cover three loads: clean, dry compressed air for optical sorters and packing, low-pressure air from blowers for conveying and drying, and dust collection for husk, bran and meal. Nexus Turnkey designs them together for mills that run long seasons in heat and dust. We size the compressors to the sorters' real demand, match blowers to the conveying design, and select cyclones, bag filters and fans for each extraction point, with combustible dust in mind.

Tall steel storage silos with access ladders against a clear sky
Factory cross-section highlighting the air services used in Agro-processing: Compressed air, Air treatment, Blowers, Dust collection, Dehumidification, Monitoring (AirSight). PRODUCTION HALLN₂+
Fig. · Factory cross-section, air services

Agro-processing

Air systems for rice and feed mills

Rice and feed mills move grain with air and spend air rejecting what they don't want. The lens follows dry compressed air to the optical sorters, blower air through conveying lines and dryers, and dusty air from husking, milling and pelleting into cyclones and bag filters. Stores are kept dry and the sorter supply is monitored.

Air services in focus: Compressed air, Air treatment, Blowers, Dust collection, Dehumidification, Monitoring (AirSight).

Explore agro-processing

The challenge

Rice milling and feed production are core processing industries in Cambodia, and mills run long, demanding seasons. Optical sorters fire short, precise air jets to eject discoloured or foreign grains. They need steady pressure and clean, dry air, or they misfire. Husking, whitening, polishing, grinding and pelleting produce large volumes of dust. That dust is a nuisance, a health issue and, as fine organic powder, a combustible-dust risk. Conveying and drying use low-pressure air. Heat and dust work against compressors and blowers, and stored grain and bran pick up moisture in the monsoon.

The air services a mill needs

For the sorters, compressed air is sized to their real demand. A local receiver beside the sorters, a refrigerated dryer and point-of-use filtration hold steady pressure and dryness. A dust-protected compressor room with filtered intake and ducted ventilation keeps machines running. See compressed air systems and air compressors.

For conveying and drying, roots blowers or screw blowers are matched to the conveying design and dryer airflow. See blowers.

For dust, a cyclone separator takes the coarse fraction and a baghouse handles the fine dust. Fans and ducting are sized for capture velocity, and differential-pressure monitoring is included. Read dust collection for cement, rice and feed mills and see air quality and emissions.

For stores, dehumidifiers protect milled rice, bran and packaged feed in closed stores.

Pressure, power and collector differential pressure on one screen support energy optimisation. Savings are project-specific. We measure them against a baseline and verify them after implementation; we don’t promise a blanket percentage.

What we check first

A mill’s air problems usually surface at peak season, when there is least time to fix them. A pre-season survey checks four things.

  • Pressure at the sorters during full throughput. If it dips when sorters fire together, they need local storage or a better supply line, not a bigger compressor.
  • Dryer and drain condition. Failed drains and bypassed dryers send water to the ejectors. Both are cheap to fix.
  • Collector differential pressure and bag condition. Rising differential pressure means blinded bags or poor cleaning. Falling differential pressure can mean a torn bag and dust going out of the stack.
  • Blower duty against the conveying design. Blowers run far from their design point waste energy and wear quickly. Blockages and line wear show up as pressure changes.

Each finding is costed and ranked so maintenance can be planned for the off-season.

Standards that apply

Typical scope

PackageWhat it usually includes
Compressed airDust-protected room, compressors, dryer, receivers at sorters
Low-pressure airBlowers for conveying, aeration and drying
Dust collectionCyclones, bag filters, fans, ducting, monitoring
SupportParts on site, maintenance contract, leak programme

Size the cost of leaks around the mill with the leak cost calculator, and keep critical spare parts close to hand before the season starts.

Scope

Relevant standards

Standards that commonly shape this industry's air
StandardWhy it matters here
ISO 8573-1:2010Purity classes for compressed air. Sorter makers specify the air quality their ejectors need; we write it as a class.
NFPA 61US standard for preventing fires and dust explosions in agricultural and food processing facilities. A useful reference for combustible-dust risk; local rules and your insurer decide what applies.
We design to the standard your process requires. Nexus describes these standards; it does not claim certification against them.

FAQ

Questions engineers ask us

Why do our colour sorters reject good grain or miss defects?

Pressure swings and wet or oily air at the ejectors are common air-side causes. Sorters need steady pressure and clean, dry air. A local receiver, a properly sized dryer and point-of-use filtration usually stabilise them.

Bag filter or cyclone for rice husk?

A cyclone removes the coarse fraction cheaply and is often used first. Fine dust from milling and polishing needs a bag filter to meet emission limits and keep the workplace clean. Many mills use both in series.

Is rice and feed dust an explosion risk?

Fine organic dust can be combustible. Collector design should consider explosion venting or isolation, spark detection where needed and housekeeping. We flag the risk in design and coordinate with your safety adviser and insurer.

Can blowers replace compressed air for conveying?

For dilute-phase conveying of grain, bran and meal, a blower usually does the job at far lower energy per cubic metre than compressed air. We check the conveying design and select the blower to match.

Next step

Get your mill ready before the season

Send us your sorter, conveying and dust-collection list. We will check air supply, blowers and collectors before peak season.

Start typing to search