Phnom Penh, serving Cambodia and the region

Service

Find the leaks you pay for every hour, including the hours you are closed

Compressed air leak detection finds, tags and quantifies leaks while your plant is running, using ultrasonic instruments that hear leaks you cannot. Nexus Turnkey records each leak's location, size and estimated cost in a leak register, ranks repairs, and can fix them on the spot or in a planned shutdown. We then re-survey to confirm the repairs held, and look at why leaks occur, so the savings last. Savings are verified against a measured baseline, not promised as a percentage.

Pressure gauges and valves on industrial equipment

The leak that never stops

A compressed air leak runs whenever the system is pressurised. It runs during production, during breaks and, in many plants, through nights and weekends when the compressors are left on. Each leak is small. Together they can keep a compressor running just to feed air into the room.

The US Department of Energy identifies leaks as a significant source of wasted energy in industrial compressed air systems. They also cause problems that do not show on the energy bill: pressure drops that make machines misbehave, compressors running longer and needing service sooner, and pressure that someone eventually raises at the compressor to compensate. Raising the setpoint makes every remaining leak worse.

Most leaks are silent in a working factory. You cannot hear them over production noise, and they rarely leave a trace. That is why they persist.

How we find them

We use ultrasonic leak detection. Air escaping through a small opening creates turbulence that produces high-frequency sound above the range of human hearing. An ultrasonic detector picks up that sound and makes it audible, so a technician can locate leaks quickly, even next to running machines.

We survey the whole distribution system while it is under pressure: the compressor room, treatment equipment, the ring main, drops, hoses, machine connections and the machines themselves.

Where leaks usually hide

  • Threaded joints at drops and machine connections
  • Hoses, hose clamps and hose connections
  • Condensate drains stuck open, or timed drains blowing off air
  • Flanges and unions on older piping
  • Treatment equipment housings and receiver connections
  • Machines left pressurised when idle

What we record

Every leak is tagged on site, so your team can find it again, and logged in a leak register.

  • Location: area, line and a description precise enough to find it;
  • Size: classed by the ultrasonic reading and inspection;
  • Estimated flow and cost: from leak size, line pressure, your compressors’ specific power, running hours and tariff;
  • Repair: what is needed, whether it can be done live or needs isolation, and its priority.

The register ranks repairs so the largest losses and easiest fixes come first. It is also the baseline for checking that repairs held.

What the survey report contains

Leak survey deliverables

  • The leak register: every tagged leak with location, size class, estimated flow and cost, and repair priority
  • A summary of total estimated leakage and what it costs per year at your tariff
  • Photos of significant leaks and hard-to-find locations
  • Recommended repairs, split into fix-now and planned-shutdown work
  • Observations on causes: drains, idle zones, pressure, hose and joint condition
  • A recommended re-survey interval

Repair, then verify

Many small leaks can be fixed during the survey if you want that: tightening a joint, replacing a hose clamp or a worn hose. Others need parts, isolation or a planned shutdown. Either way, each repair is recorded against its tag.

We then re-survey, or re-measure off-production demand, to confirm that the repairs held and to find any new leaks. Savings are verified against the measured baseline. Savings are project-specific. We measure them against a baseline and verify them after implementation; we don’t promise a blanket percentage.

Fixing leaks is easy. Keeping them fixed is the part that pays.

Stop them coming back

Leaks return when the causes stay. As part of the survey report we look at those causes and recommend changes:

  • isolating zones and idle machines when they are not in use;
  • replacing timed drains that blow off air with zero-loss drains;
  • reducing system pressure, once restrictions are removed, so remaining leaks lose less;
  • replacing poor joints and worn hoses with better ones during planned work;
  • a regular re-survey, at a frequency based on how quickly new leaks appear.

A maintenance contract can include periodic leak surveys so the gains hold.

Where leak detection fits

Leak detection is often the first, quickest win in energy optimisation, and it is part of every air audit. It is also a standard step before plant renovation, so new piping is sized for real demand rather than demand inflated by leaks.

Want a quick estimate first? The leak cost calculator shows what leaks of different sizes cost at your pressure, hours and tariff. The pressure reduction tool shows why lower pressure means less air lost. For more background, read the hidden cost of compressed air leaks.

FAQ

Questions engineers ask us

How does ultrasonic leak detection work?

Air escaping through a small opening produces turbulence, which generates high-frequency sound above the range of human hearing. An ultrasonic detector converts that sound into an audible signal and a reading, so a technician can find leaks quickly, even in a noisy factory.

Do you need to stop production for a leak survey?

No. The survey is carried out while the plant is running and under pressure, which is when leaks are present. Some repairs need a short isolation, which we schedule with you.

How do you estimate what each leak costs?

We estimate each leak's flow from its size and the line pressure, then convert it to energy and cost using your compressors' specific power, running hours and electricity tariff. Where we have measured off-production demand, we use it to check the total.

Do you repair the leaks as well?

Yes. Many small leaks can be fixed during the survey, if you want that. Others are tagged and repaired in a planned window. Either way, each repair is recorded against the leak register.

How often should we survey for leaks?

Leaks come back as joints age, hoses wear and machines are moved. Most plants benefit from regular surveys. We recommend a frequency based on what the first survey finds and how quickly new leaks appear.

Is leak detection the same as an air audit?

No. A leak survey finds and quantifies leaks. An air audit measures the whole system: compressors, pressure, treatment and demand. Leak detection is usually part of an audit and is also available on its own.

Next step

Turn an estimate into a measured leak survey

Tell us about your plant's size, shifts and compressors. We will plan a survey that covers the whole distribution system.

Start typing to search