A desiccant rotor is a honeycomb wheel coated with silica gel or molecular sieve. Process air passes through most of its face and gives up moisture by adsorption. A smaller reactivation sector is fed with heated air that drives the moisture out and exhausts it, so the wheel dries continuously as it turns.
Unlike refrigerant dehumidifiers, which condense water on a cold coil, desiccant units keep working at low temperatures and can reach low dew points. That makes them the usual choice for very dry rooms, cold stores, low-humidity pharmaceutical and electronics areas, and as a pre-dryer for an AHU.
Reactivation heat is the main running cost, so recovering heat or using waste heat improves economics. Keep process-air filters clean; dust and oil aerosols shorten rotor life.