An RTO passes VOC-laden exhaust through a hot ceramic bed into a combustion chamber, typically held somewhere around 760-850 °C, where the organics oxidise to carbon dioxide and water. The clean, hot gas then heats a second bed; the flow direction is switched periodically so the beds alternately store and release heat.
RTOs suit large exhaust volumes with continuous solvent loads, such as printing, coating and chemical processes. Destruction efficiencies in the region of 95-99% are commonly specified; confirm the guaranteed figure for your inlet conditions.
Fuel use depends on VOC concentration. Above a certain level the solvent itself sustains the temperature; very dilute exhaust needs support fuel, which is why low-concentration streams are often first concentrated with a zeolite rotor. Check for halogenated or silicone compounds early, as they affect material choice and media life.