Phnom Penh, serving Cambodia and the region

Nexus rangeEvaporative cooling tower

Cooling towers

Cooling towers that reject heat from water-cooled chillers and process equipment by evaporation, selected for high wet-bulb conditions.

Spec summary

At a glance

TypeEvaporative cooling tower

Capacities selected to your load. Ask for a datasheet.

Key features

  • Evaporative heat rejection towards the wet-bulb temperature
  • Fill media to maximise air and water contact
  • Fan and motor sized for the design duty
  • Drift eliminators to limit water carry-over
  • Basin, make-up and blowdown connections for water management

Applications

  • Condenser water for water-cooled chillers
  • Process cooling for moulding, extrusion and compressors
  • Cooling water for heat exchangers and jackets

Heat rejection by evaporation

A cooling tower cools water by letting a small part of it evaporate. Warm water from a chiller condenser or a process is spread over fill media while a fan draws air through. Evaporation takes heat from the remaining water, which collects cooled in the basin and returns to the equipment. Because it works by evaporation, a tower can cool water towards the outdoor wet-bulb temperature, which is lower than the dry-bulb temperature that air-cooled equipment works against.

The Nexus range includes cooling towers for chiller condenser water and process cooling. Capacities are selected to your load. Ask for a datasheet.

How it works

Hot water is distributed over the fill through nozzles or troughs. The fill breaks it into thin films and droplets to maximise contact with the air. The fan, usually at the top, draws air through the fill. Drift eliminators catch droplets before they leave with the air. The cooled water collects in the basin, where make-up water replaces what has evaporated, and a controlled blowdown removes some water to stop minerals concentrating.

Where it fits

  • Condenser water for water-cooled chillers.
  • Process cooling for plastics moulding and extrusion, water-cooled compressors and heat exchangers.

Selection notes

  • Design wet-bulb. A tower can only approach the wet-bulb temperature, never reach it. In a humid climate the design wet-bulb is high, so the tower must be selected for it. An undersized tower sends warm water back and the chiller or process pays for it.
  • Water treatment. Evaporation concentrates dissolved minerals, and warm water supports biological growth. A treatment programme controls scale, corrosion and organisms including Legionella, and protects heat exchangers.
  • Make-up water. Evaporation and blowdown use water continuously. Supply and quality must be reliable.
  • Siting. Free air movement around the tower, away from fresh-air intakes and from its own discharge.
  • Maintenance access. Fill, nozzles, basin and fan need regular inspection and cleaning.

What Nexus provides

Tower selection at your design wet-bulb, condenser and process water system design, installation and commissioning, and planned maintenance including cleaning, fan service and coordination of water treatment.

Next step

Request a quote for Cooling towers

Send your operating data and we will size and propose the right configuration.

Start typing to search