Large cooling loads, rejected to the wet-bulb
A water-cooled chiller rejects its heat into condenser water, which carries it to a cooling tower. The tower cools the water by evaporation, towards the outdoor wet-bulb temperature. Wet-bulb temperature is lower than dry-bulb, so a water-cooled chiller usually condenses at a lower pressure than an air-cooled one in the same climate and uses less compressor power for the same cooling. For large, steady loads, that difference adds up.
The Nexus range includes water-cooled chillers with screw compressors for these duties. Capacities are selected to your load. Ask for a datasheet.
How it works
The chiller’s evaporator cools the chilled water serving the plant. Screw compressors raise refrigerant pressure, and the refrigerant condenses in a shell-and-tube condenser cooled by water from the tower. The warmed condenser water returns to the tower, where part of it evaporates and cools the rest. Pumps circulate both water loops. Capacity control on the screw compressors, and multiple chillers in larger plants, match output to load.
Where it fits
- Large process cooling loads in plastics, food, beverage, pharmaceutical and chemical plants.
- Central chilled-water plants serving several buildings.
- Sites with space for a plant room and a cooling tower, and a reliable water supply.
For smaller loads or sites without water, compare an air-cooled chiller.
Selection notes
- Design for the wet-bulb. Humid climates mean high wet-bulb temperatures. Chiller and tower are selected together at your site’s design wet-bulb.
- Water treatment. Condenser water concentrates minerals and supports biological growth in warm conditions. A water treatment programme protects condenser tubes and controls health risks such as Legionella.
- Tube cleaning. Fouled condenser tubes raise condensing pressure and power. Periodic cleaning keeps efficiency up.
- Plant efficiency. Pumps, tower fans and chillers together determine plant efficiency. We look at the whole plant, not only the chiller COP.
- Redundancy. Multiple chillers allow staging at part load and N+1 cover.
What Nexus provides
Load calculation, chiller and tower selection at site conditions, plant-room and piping design, controls, installation and commissioning, and planned maintenance including tube cleaning, refrigerant checks and coordination of water treatment.