Phnom Penh, serving Cambodia and the region

Ingersoll RandCondensate drains, instruments and control parts

Drains, sensors and controllers

Condensate drains and service kits, pressure and temperature sensors, controllers and display parts for compressed air systems.

Spec summary

At a glance

TypeCondensate drains, instruments and control parts

Parts confirmed by part number and nameplate. Send us a photo.

Key features

  • Zero-loss drains and drain service kits
  • Pressure and temperature sensors and transducers
  • Compressor controllers and display modules
  • Dew-point and flow instrument parts
  • Parts confirmed by part number and nameplate

Applications

  • Drain failures and planned drain servicing
  • Sensor replacement after a fault or drift
  • Controller repairs and upgrades
  • Adding instruments for monitoring and sequencing

The small parts that stop big problems

A failed drain floods a dryer. A drifting pressure sensor makes a compressor load at the wrong pressure. A failed temperature sensor trips a machine, or worse, fails to. These parts are small and inexpensive compared with the equipment they protect, and they are among the most common reasons a compressed air system misbehaves.

What we supply

  • Condensate drains and drain service kits, including zero-loss drains.
  • Pressure sensors and transducers for compressors, dryers and networks.
  • Temperature sensors for airends, coolers and dryers.
  • Controllers and display modules for the compressors we represent.
  • Instrument parts for dew-point, flow and pressure monitoring.

Each part is confirmed by part number and nameplate before ordering.

Signs a part needs attention

  • Drains: water downstream of a dryer or filter, a drain that never cycles, or one that blows air continuously.
  • Pressure sensors: setpoints that do not match a calibrated gauge, erratic loading, or pressure readings that jump.
  • Temperature sensors: nuisance trips, readings that do not match conditions, or alarms that never appear when the room is hot.
  • Controllers: display faults, lost settings, or communication failures with a sequencer or monitoring system.

Upgrades as well as repairs

Instruments are also how a plant sees its compressed air system. Adding pressure, flow and dew-point instruments at key points lets a sequencer work properly and feeds monitoring through Nexus AirSight on our SCADA and monitoring page.

Tropical conditions

Humid weather means high condensate loads, so drains work harder and need service kits more often. Heat and dust shorten the life of electronics in poorly ventilated rooms. We check drains, sensors and controller cooling at each maintenance visit.

What Nexus provides

Part identification, supply, fitting and calibration checks during maintenance visits, and advice on instrument upgrades for monitoring. Send us a photo of the part number or nameplate and a description of the fault.

Next step

Request a quote for Drains, sensors and controllers

Send your operating data and we will size and propose the right configuration.

Start typing to search