An air receiver is a rated pressure vessel in the compressed air system. A “wet” receiver sits before the dryer and also drops out water; a “dry” receiver sits after treatment, close to large or intermittent loads.
Storage does three jobs. It covers short demand peaks without starting another compressor. It gives load/unload machines time between cycles. And it steadies pressure for sensitive equipment, which can let you lower the set point.
Practical note: receiver volume should be calculated from the demand profile, the allowable pressure drop and the compressors’ control type, not picked from a rule of thumb. Every receiver needs a correctly rated safety valve, a pressure gauge, a reliable condensate drain, isolation for inspection and a documented inspection regime under applicable pressure-vessel rules.