Dry air delivered where it is needed
A dehumidifier dries the air that passes through it. In a large or divided space, a freestanding unit dries its own corner well and the far end poorly. A ducted dehumidifier solves that. It draws air back from the space through return ducts, dries it, and supplies it through a duct network so the whole space reaches the target. The unit itself sits out of the way, in a plant room, on a mezzanine or in a ceiling void.
AirMax ducted dehumidifiers are refrigerant units designed for this kind of installation. Capacities are selected to your load. Ask for a datasheet.
How it works
Return air passes through a filter and a cold evaporator coil, where moisture condenses below its dew point and drains away. The dried air is reheated over the condenser and supplied through ductwork. A remote sensor in the space, not at the unit, controls it to the target relative humidity. Some installations add a fresh-air connection so the unit also dries ventilation air before it enters the room.
Where it fits
- Large warehouses and stores with even humidity requirements.
- Several rooms or zones served from one unit.
- Spaces where floor units would obstruct work or cleaning.
- Buildings with existing ventilation that adds humid outside air.
Selection notes
- Design the ducts with the unit. Supply and return positions decide whether dry air reaches every zone. We lay out duct routes, grilles and airflow with the selection.
- Treat fresh air at the source. Outside air is usually the largest moisture load in Cambodia. Drying it as it enters is more effective than chasing it once it is in the room.
- Coordinate with cooling. In spaces with AHUs or air conditioning, the dehumidifier and cooling controls must work together, not against each other.
- Low targets. Where the target humidity is low, a desiccant rotor unit may be the better ducted choice.
What Nexus provides
As technology partner and authorised distributor for AirMax, we calculate the load, design the ductwork and controls, install and commission the system, and verify humidity across the space at handover. We then maintain the unit and its filters, drains and sensors.