Phnom Penh, serving Cambodia and the region

Glossary

kWh/m³ (specific energy)

The electrical energy a compressed air system uses per cubic metre of air delivered, measured over time at plant level.

Specific energy divides the energy consumed by the compressor hall, in kWh, by the volume of air delivered over the same period. Unlike datasheet specific power, it captures real operation: part load, unloaded running, control losses, treatment and the pressure you actually run at.

It is the single best KPI for a compressed air system. It turns “the compressors seem busy” into a number that can be baselined, tracked weekly and used to verify the effect of a change such as a new sequencer or leak repairs.

Practical note: you need a power meter on each compressor (or the hall) and a flow meter downstream of treatment. Normalise for production and pressure before comparing periods, and always state whether the volume is at inlet or normal conditions.

Next step

Need this applied to your plant?

We turn definitions into specifications, then into equipment that meets them.

Start typing to search