The general-purpose screw compressor for industrial plant air
The Next Generation R-Series is Ingersoll Rand’s line of oil-flooded rotary screw compressors for general industrial duty. It comes in fixed-speed versions for steady load and VSD versions that vary motor speed to follow demand. That makes it a natural building block for a compressor hall: fixed-speed machines on base load, one VSD machine as the trim compressor.
Ask us which series are currently supplied in Cambodia, and we will send current datasheets for the sizes that fit your duty.
How an oil-flooded screw compressor works
Two meshing helical rotors trap air and reduce its volume as they turn. Oil injected into the airend seals the clearances, lubricates the bearings and carries away most of the heat of compression. A separator removes the oil from the compressed air before it leaves the package, and the oil returns through a cooler and filter. The design runs continuously and quietly, which suits industrial duty around the clock.
The air leaving any oil-flooded compressor carries a small amount of oil aerosol and is saturated with water vapour. Downstream air treatment brings it to the ISO 8573-1 class your users need.
Where it fits
- Plants with steady demand, where a fixed-speed machine runs loaded most of the time.
- Plants with variable demand, where a VSD machine trims the swings.
- Halls that need N+1 redundancy with interchangeable machines.
Ingersoll Rand describes features on this range including V-Shield leak-resistant fluid connections and Progressive Adaptive Control, which adjusts operation to protect the machine in conditions such as high temperature. We confirm current features against the datasheet for each model offered.
Selection notes
- Size from data. Fixed speed or VSD should be decided from logged demand, not habit. A VSD machine sized too large spends its life at minimum speed.
- Check the room. Confirm the rated maximum ambient against your compressor room in the hot season, and design ventilation so the package does not breathe its own exhaust.
- Plan the treatment. Dryer and filter sizes are corrected to your inlet and ambient temperatures.
What Nexus provides
Selection against your demand profile, room and electrical design, installation and commissioning with performance checks, sequencing with your existing machines, and lifecycle support: genuine parts, planned servicing and maintenance contracts under one team.
