Phnom Penh, serving Cambodia and the region

SollantOil-injected rotary screw, fixed speed

Sollant fixed-speed screw compressors

Fixed-speed oil-injected screw compressors for steady base-load duty, where the machine runs loaded most of the time.

Sollant LGPM20A rotary screw air compressor package with red and grey panels, front view showing the controller display

Spec summary

At a glance

TypeOil-injected rotary screw, fixed speed

Capacities selected to your load. Ask for a datasheet.

Key features

  • Oil-injected rotary screw airend for continuous duty
  • Fixed-speed drive, simple and economical on steady load
  • Load/unload control with pressure setpoints
  • Packaged with cooling, separation and controller
  • Can be sequenced with PM-VSD trim machines

Applications

  • Base-load duty in multi-compressor halls
  • Plants with steady demand across shifts
  • Standby machines under an N+1 arrangement
  • Compressed air for production lines, tools and blow-off

Simple, steady air for steady demand

Not every plant needs variable speed. Where demand is steady through two or three shifts, a fixed-speed oil-injected rotary screw compressor runs loaded most of the time, at its best operating point, with a simpler drive and lower purchase cost. Sollant’s fixed-speed screw compressors fill that role, and they pair naturally with Sollant PM-VSD machines on trim.

Ask us which series are currently supplied in Cambodia. We will confirm current series names, sizes and datasheets for your duty.

How it works

The motor runs at constant speed. When pressure reaches the upper setpoint, the inlet closes and the compressor runs unloaded; when pressure falls to the lower setpoint, it loads again. After a set period unloaded, the controller stops the motor. This load/unload control is simple and reliable. Its weakness is unloaded power: an unloaded compressor still draws a significant share of its full-load power while making no air. That is why a fixed-speed machine belongs on base load, where it rarely unloads.

Where it fits

  • Base load in a hall. One or more fixed-speed machines run loaded; a PM-VSD trim machine handles the swings under a sequencer.
  • Steady single-machine duty. Plants whose demand is close to one machine’s capacity for most of the day.
  • Standby. A cost-effective N+1 standby, run in rotation so it stays proven.

Selection notes

  • Check the profile. Logged demand shows whether a fixed-speed machine would run loaded or spend hours unloaded. If it would unload often, variable speed is the better choice for that slot.
  • Receiver volume. Adequate receiver capacity reduces load/unload cycling and protects the motor from frequent starts.
  • Tropical rooms. Confirm the rated maximum ambient and design ventilation for the hot season.

What Nexus provides

As an authorised distributor of Sollant, we size the base/trim arrangement from your demand data, design the room and electrics, install and commission the compressors, and support them with genuine Sollant parts, planned servicing and maintenance contracts.

Next step

Request a quote for Sollant fixed-speed screw compressors

Send your operating data and we will size and propose the right configuration.

Start typing to search